• State Not Answered
  • Date
    Jason Lord
  • Date
  • Replies 1 reply
  • Subscribers 185 subscribers
  • Views 2396 views
  • Users 0 members are here

Ayrton Magic Blade R profile, is it off?

I was given (8) of these yesterday. Ayrton Magic Blade R.  Tried Standard and Extended mode.   The profiles in ION  v 2.3.3.9.0.10 seem to be way off.  Only pan/tilt respond correctly.  The rest is a guessing game.

The dmx layout is here: Click Here

I'm not a wizard in the fixture profile editor yet.  If there is anyone that can confirm this profile is accurate, or correct if not, that would help.

Thanks

Parents
  • 0
    Hey Jason,

    Here is a profile I've used in the past. I can't remember if I built it or it came with the desk. I probably built it off the Magic Panel R - honestly don't know.

    https://www.dropbox.com/s/tappnho67qutuny/Magic%20Blade%20R%202016-10-09%2016-29-27.esf?dl=0

    Channel 1 is the parent fixture, Channel 2 is the LED fixture. 7 LEDs per head.

    A word of caution - if you merge this into your showfile it's going to merge the whole fixture list. I didn't take the 45 minutes needed to clean it out - so either clean it first or burn your showfile after this gig.

    Feel free to email me if it's not working.
Reply
  • 0
    Hey Jason,

    Here is a profile I've used in the past. I can't remember if I built it or it came with the desk. I probably built it off the Magic Panel R - honestly don't know.

    https://www.dropbox.com/s/tappnho67qutuny/Magic%20Blade%20R%202016-10-09%2016-29-27.esf?dl=0

    Channel 1 is the parent fixture, Channel 2 is the LED fixture. 7 LEDs per head.

    A word of caution - if you merge this into your showfile it's going to merge the whole fixture list. I didn't take the 45 minutes needed to clean it out - so either clean it first or burn your showfile after this gig.

    Feel free to email me if it's not working.
Children
No Data
Related

www.etcconnect.com