• Date
    TrojanMBA
  • Date
  • Replies 5 replies
  • Subscribers 185 subscribers
  • Views 10598 views
  • Users 0 members are here

911 Help!! Desperatily Need Fixture Profile for Imported R7 230 Beam Moving Head Lights

Help Please.  Does anyone have a fixture profile for R7 230 Sharply Beam Moving Lights imported from China?  I just received these for a show opening in 2.5 weeks and cannot find a profile that makes sense.  I am working with ETC Nomad (without a programming wing). 

 

R7 230 Beam Moving Head Light Manual.pdf

Parents
  • your fixture has a standard and an extended mode. i didn't look at the extended one, but the 16ch mode seems to be identical to an original Sharpy by ClayPaky. i didn't look into the parameter ranges but the parameters seem to line up. and even address 8 which would be diffusion in the original which the copy doesn't have is simply left empty. i would start with the original sharpy personality and then check and if need be edit the ranges.
Reply
  • your fixture has a standard and an extended mode. i didn't look at the extended one, but the 16ch mode seems to be identical to an original Sharpy by ClayPaky. i didn't look into the parameter ranges but the parameters seem to line up. and even address 8 which would be diffusion in the original which the copy doesn't have is simply left empty. i would start with the original sharpy personality and then check and if need be edit the ranges.
Children
No Data
Related

www.etcconnect.com