OSC on iOS 10

Hi all,

I don't know if the issue I'm having now is with iOS 10 or EOS 2.4 but I can no longer connect with TouchOSC. Is anyone else having this problem? Is there a work-around?

Thanks

Parents

0 dsmurfin over 8 years ago

What issue are you having? I've been running iOS 10 with Eos 2.4 and TouchOSC for a long time and have had no issues. What do you mean when you say it won't connect?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to dsmurfin

Maybe "It won't connect" isn't the correct phrasing, but I have no control. I haven't changed any settings on my phone since I upgraded to iOS10. and I haven't changed any of the show controls settings in my base house file since upgrading to 2.4, but when I go into TouchOSC, I just have no control of the console anymore. Nothing happens when I type, and neither of the red or green indicators blink.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to Druuka

Thanks Andrew. I'll look into that. I know it's something I'm weak on.

I changed the settings so now the host of TouchOSC is .101. But it's still not changed. I'm only receiving data from the console still.

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 8 years ago in reply to BenjaminWeill

Did you change the subnet mask on your touchosc device? 255.255.0.0
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to Druuka

yes
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 8 years ago in reply to BenjaminWeill

Did you clear the stringRX and stringTX port values? You can't have the ports used for two different protocols.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to Druuka

well, I [@] [enter]'d them both. They're not both "0," not empty. Is there a way to FULLY clear out the field?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 8 years ago in reply to BenjaminWeill

0 is as good as nothing in this case. and actually it would already be enough to have string port numbers that are different from the OSC numbers
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to ueliriegg

still not working, though...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 8 years ago in reply to BenjaminWeill

How about a new batch of photos. At this point I don't know what settings/addresses/ports you have set to what.

FYI this frustration that you feel is one of the reasons Patrick and I made oscRFR.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to Druuka

Hi all,

Here's a new set of pictures.

I'm also not getting the green "sending" indicator on TouchOSC when I press buttons when I'm on our lighting network. I only get the red "receiving" indicator when I press buttons on the bio.

I looked into oscRFR (It looks great), but I thought it wasn't really a phone platform?

THANKS!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 corey cascio over 8 years ago in reply to BenjaminWeill

Hi Ben,

In the console, the Network Address has the Default Gateway empty. Please enter in there 10.101.1.1 .
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 8 years ago in reply to BenjaminWeill

oscRFR is meant for tablets but will run on phones. The buttons will be very VERY small.

I would try removing the broadcast address you have the string tx ip address field.

restart your device with touchOSC

lower in the shell settings do you have osc turned on and in 1.0 mode?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 BenjaminWeill over 8 years ago in reply to Druuka

still only receiving data :(.

I added the default gateway.

Broadcast address removed

device restarted.

Yes, OSC is on and in 1.0 mode.

Thanks!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Druuka over 8 years ago in reply to BenjaminWeill

Can you ping the console ip address from your tablet/phone?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 corey cascio over 8 years ago in reply to BenjaminWeill

On the Console Settings Page -> Interface Protocols -> Are WIFI REMOTE and UDP Strings & OSC both enabled?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 corey cascio over 8 years ago in reply to corey cascio

Hi Benjamin,

I noticed in the OSC Settings in your Mobile device,

your Host IP is not the same as your console.

The Host IP needs to be the same as Console IP.

Please correct this.

That should get it working.

Further more, it would be best to set ETC's recommended

IP Addresses for your devices to help with Troubleshooting in the future.

The Network Address in your Mobile Device needs to be:

IP: 10.101.124.201

Subnet Mask: 255.255.0.0

Gateway IP: 10.101.1.1

The Network Address in your Console Needs to be:

IP: 10.101.100.101

Subnet Mask: 255.255.0.0

Gateway IP: 10.101.1.1

You can see the whole list of Recommended IPs in this Support Article

http://www.etcconnect.com/Support/Articles/ETC-Network-IP-Addresses.aspx
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 corey cascio over 8 years ago in reply to corey cascio

Hi Benjamin,

I noticed in the OSC Settings in your Mobile device,

your Host IP is not the same as your console.

The Host IP needs to be the same as Console IP.

Please correct this.

That should get it working.

Further more, it would be best to set ETC's recommended

IP Addresses for your devices to help with Troubleshooting in the future.

The Network Address in your Mobile Device needs to be:

IP: 10.101.124.201

Subnet Mask: 255.255.0.0

Gateway IP: 10.101.1.1

The Network Address in your Console Needs to be:

IP: 10.101.100.101

Subnet Mask: 255.255.0.0

Gateway IP: 10.101.1.1

You can see the whole list of Recommended IPs in this Support Article

http://www.etcconnect.com/Support/Articles/ETC-Network-IP-Addresses.aspx
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data