• Date
    dnhopper
  • Date
  • Replies 3 replies
  • Subscribers 184 subscribers
  • Views 2291 views
  • Users 0 members are here

Fixture Request/Problem - Apollo Smart Move DMX

Could a more comprehensive profile for the Smart Move DMX be made with the ability to access the built in FX?

http://www.apollodesign.net/media/resources/SmartMove_Manual.pdf

Need ASAP.

Parents
  • Hi!

    So, as it turns out you have actually encountered a bug. The modes are in the profile already- but are not showing up on the encoders/ML Controls. RND 0039155: Fixture "Mode" Parameter Not Displayed or Controllable

    In the meantime as a workaround you can access these modes by doing the following:

    Select the Channel and the select mode from the Parameter tiles to the left of the CIA and set it to 255:
    Chan [x]{Mode}[255][Enter]
    After this command has been entered ML controls and encoders should now display the different built in FX.

    We are working to fix the bug in a future version and we are sorry for the inconvenience.

    Thank you.
Reply
  • Hi!

    So, as it turns out you have actually encountered a bug. The modes are in the profile already- but are not showing up on the encoders/ML Controls. RND 0039155: Fixture "Mode" Parameter Not Displayed or Controllable

    In the meantime as a workaround you can access these modes by doing the following:

    Select the Channel and the select mode from the Parameter tiles to the left of the CIA and set it to 255:
    Chan [x]{Mode}[255][Enter]
    After this command has been entered ML controls and encoders should now display the different built in FX.

    We are working to fix the bug in a future version and we are sorry for the inconvenience.

    Thank you.
Children
Related

www.etcconnect.com