Colour encoder Screen bug EOS Ti and Effect oddity in 2.5

Hi all,

If one has a scroller with more the 14 Frames the Encoder Display is not changing to the next page of tiles on a EOS Ti, it does on a Gio. Also the little arrows underneath the colour chips on the encoder screen have gone missing. So one can't page thru multiple screens of colours. This was a very useful feature to us and we would like to have it back, please.

Also if you run an intensity effect manually in a blocked cue, the colour of the tombstones does not change to red indicating manual intensity values. The intensities run up and down as expected and the E# in the tombstone is red.

Parents

Hans.Hinrichsen over 8 years ago

Hi Florian,

The scroller issue is on the list and should be addressed in 2.5.1.

I'll check into the second issue you mention and report back.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Hans.Hinrichsen over 8 years ago in reply to Hans.Hinrichsen

The second issue is intentional. Because effects sometimes use the underlying data, we try to show the type of source that data is. Otherwise, it may be ambiguous if you're in the middle of a large cue edit and trying to figure out what all has been modified (was it just the effect? or the underlying intensity?) -- particularly if this is on something like a pan/tilt effect.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Hans.Hinrichsen over 8 years ago in reply to Hans.Hinrichsen

The second issue is intentional. Because effects sometimes use the underlying data, we try to show the type of source that data is. Otherwise, it may be ambiguous if you're in the middle of a large cue edit and trying to figure out what all has been modified (was it just the effect? or the underlying intensity?) -- particularly if this is on something like a pan/tilt effect.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data