• State Suggested Answer
  • Date
    jkpitzer
  • Date
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 188 subscribers
  • Views 2377 views
  • Users 0 members are here

Programming specific shape movements

I need to program an effect where 2 moving lights make mirrored circles that run repeatedly. However, when I use the effect that has a pre built circle, it doesn't actually look like a circle on the stage. Also, they tend to not start and end together. Can anyone give me guidance on haw to make something like this?

Parents
  • 0
    In order to create a perfect circle, the lights need to be shining on a surface that is completely flat and 90 degrees to the center of the circle. E.G. a light is hung pointing straight down on a flat floor and the center point of the circle is the light's home position. The more you deviate from this angle, the more elliptical the shape will be.
Reply
  • 0
    In order to create a perfect circle, the lights need to be shining on a surface that is completely flat and 90 degrees to the center of the circle. E.G. a light is hung pointing straight down on a flat floor and the center point of the circle is the light's home position. The more you deviate from this angle, the more elliptical the shape will be.
Children
No Data
Related

www.etcconnect.com