automark problem

Almost certainly you updated the cue before the blackout "Cue Only".
This records hard values into the Blackout, so the console will not mark as you've recorded a "fade down to colour".

Delete (@Enter) the hard values from the blackout.

To avoid this in the future, you may wish to use Tracking as your default Update mode.

Almost certainly you updated the cue before the blackout "Cue Only".
This records hard values into the Blackout, so the console will not mark as you've recorded a "fade down to colour".

Delete (@Enter) the hard values from the blackout.

To avoid this in the future, you may wish to use Tracking as your default Update mode.

Of course that's hard to diagnose without seeing the showfile, but Richard, I think there could be a bug around.
There is another post from another user: community.etcconnect.com/.../automark-issue

thanks Richard,
but no, the cue was not updated at all, it is a touring file for a long time, not modified and that new move appeared suddenly.
plus the desk is in tracking mode always.

thanks,
i swear no updates were made, i ran the cues several times before on that day and they were fine until this live move showed up.
Also doing shift/go was working fine.
fixed by re-telling the movers to be at preset X and update the cues.