HomePreset ignores intensity

Hej Folks,
I decided to use Preset 9999 as HomePreset and everythings fine. Except for the fact that when I home a fixture all params go to the correct value and change to grey but intensity won´t. Int won´t change and stay red when manual.

Did I find a bug or am I missing something?

Thx

0 Paule over 7 years ago

By the way, there are almost 12 universes of discussions in this forum :-D
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 7 years ago in reply to Paule

If you type Chan 1 Home Enter, it's on purpose that only FCB homes.
Is this what you're seeing?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Paule over 7 years ago in reply to ueliriegg

Exactly. But in my understanding a HomePreset gives me to opportunity to decide what should be affected.
And in older software versions it worked including intensity, right?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ueliriegg over 7 years ago in reply to Paule

No, the home preset doesn't let you choose what's affected by the home preset, it only lets you modify home values. If you don't enter a value the console will take the home value from the patched personality.
And all this doesn't matter when it comes to the home command. It's designed to home only FCB
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel