Hello everyone,
I'm having difficulty trying to figure out how to do colour bumps on faders whilst busking.
My issue is that I would use Direct Selects to quickly apply new colours to the movers in the cues and thus making the colour feild manual, then I would go to hit the bump button for a momentary change of colour (via a sub or cp on a fader) that's all fine, but then when I let go of the button, the CP I just assigned for the verse or whatever is gone as the bump has cleared the manual colour values!
A perfect example is a sub that has a strobe effect that also takes the lights to white. I just wanna let go after a sec and let them go back to where they were, but I can't figure out how without doing it over the top of cues without manual values. But then it's hardly busking if nothing can become manual!
Any tips on where I'm going wrong, or work arounds that still allow me to change colour pallets during pre saved cues and still be able to bump away with other colours?
Thank you thank you thank you in advance!
adam
Trying to sort out spacing
[edited by: Adamm at 6:01 PM (GMT -5) on Sun, Jul 9 2017]