Anyone out there had a problem with faders? Let me explain, I have fader 3 set as Sub 3 Which contains Conductor Spec. Settings, additive, proport., htp, exclusive, times both 0 with dwell as man. Heres the problem the past 2 times i've ran the B.O. Q# while snapping the fader to the down, i notice that the ch. has come back to around 30%, so i quickly run the fader back to about 5% then back down, in which case the ch goes completly out. Twice now this has happened, so i just thought i'd see if anyone else has ran into this problem. Unfort. I have not been able to reproduce this bug (or problem) yet other than when i don't want it to happen. Today I am running a different show file and don't seem to have the problem yet, of course in the other show file didn't have this problem at all through all the rehersels. So i am kinda of stumped, my fix yesterday for the final B.O. was to just run the GM out. Some of my shows have ch active on stage during the B.O. so this won't always work. Sorry for the long post, v 1.4.1 , 2 Eos, 1 Rvi at current time. I have already sent off show file and log files to Etc, also performed a deep clear this morning. Any input or ideas would be great.
Thanks
