• State Not Answered
  • Date
    EthanHarris
  • Date
  • Replies 5 replies
  • Subscribers 186 subscribers
  • Views 4522 views
  • Users 0 members are here

Noob Question - EOS Nomad Fader Wing

Brand new to EOS Nomad, so please excuse the Noob question...

I have 21 channels working, 6 cues, no groups, no submasters.  6 cues is all I need.  I can sequence from one cue to the next on the PC.  I would like to have each cue show up on a separate fader on our ETC 1x20 USB fader wing attached to the Nomad PC.  The wing is powered up and says Electronic Theater Controls on the LCD screen, but no LED lights on the rockers are lit. Pushing buttons or moving faders on the 1x20 wing does nothing.

I have no idea how to assign anything in EOS Nomad to a fader on the USB fader wing, and searching online on how to do this for over a day has proven fruitless.  The Nomad is brand new and came with ZERO documentation or training (very sad of ETC to not supply a manual).  I was able to figure out address patching and creating cues from youtube.  But There's nothing out there on programming the ETC 1x20 USB fader wing from EOS Nomad.  Some of the ION and other controller videos talk about using a load button, but this wing does not have a load button.  What am I missing?

My objective is to have 6 faders, each acting as an intensity master for each of the 6 cues.  Real simple.  Bring the scene intensity up and down.  Maybe someday I'll graduate to post-grad work and learn how to clear the faders and reprogram them ;-)

Help & Thanks!

Parents
  • 0
    on the 1x20 (or 2x10 / 2 x 20) fader wings, LOAD is accomplished by pressing both top and bottom bump buttons together.

    Instead of writing a cue list in this scenario, you want a submaster. (A cue is a "look" in a sequence of looks; a sub is an individual look).

    The faders can have a cue list loaded to each fader, and the fader/buttons act as Go/Stop.
    The faders can also have a submaster assigned to it (sub 1 to fader 1; sub 11 to fader 15).

    Bring up your look (manually or playback the cue).
    hit: Record Sub 1 [Label] NameOfCue [Enter]
    hit: Sub 1 [LOAD] (press both bump buttons)
    The LCD Screen on the fader wing should show 1 and the Name.

    Hit Sub Sub to see the list of recorded submasters.

    However, I don't think the fader wing is fully connected. It should show (after the ETC name) numbers under each fader. If you press Fader Control on the Nomad (or the on-screen version of the facepanel) does the LCD strip change to Page 1, Page 2, Page 3 . . . . under each fader. This will prove the Nomad is seeing the fader wing.

    Is the fader wing connected to both power (it is, obviously) and USB to the laptop?

    as for the manual: go to the ETC website and you can download the Ion or Eos manual (and print out the relevant sections). The Nomad is just running the same software as the Ion/Eos, but the facepanel (your laptop) is different.

    There is also a Help button on the "facepanel."

    You can always phone ETC help. Very useful, good techs. They can walk you through the troubleshooting and specific questions about basic programming.

    Andrew
Reply
  • 0
    on the 1x20 (or 2x10 / 2 x 20) fader wings, LOAD is accomplished by pressing both top and bottom bump buttons together.

    Instead of writing a cue list in this scenario, you want a submaster. (A cue is a "look" in a sequence of looks; a sub is an individual look).

    The faders can have a cue list loaded to each fader, and the fader/buttons act as Go/Stop.
    The faders can also have a submaster assigned to it (sub 1 to fader 1; sub 11 to fader 15).

    Bring up your look (manually or playback the cue).
    hit: Record Sub 1 [Label] NameOfCue [Enter]
    hit: Sub 1 [LOAD] (press both bump buttons)
    The LCD Screen on the fader wing should show 1 and the Name.

    Hit Sub Sub to see the list of recorded submasters.

    However, I don't think the fader wing is fully connected. It should show (after the ETC name) numbers under each fader. If you press Fader Control on the Nomad (or the on-screen version of the facepanel) does the LCD strip change to Page 1, Page 2, Page 3 . . . . under each fader. This will prove the Nomad is seeing the fader wing.

    Is the fader wing connected to both power (it is, obviously) and USB to the laptop?

    as for the manual: go to the ETC website and you can download the Ion or Eos manual (and print out the relevant sections). The Nomad is just running the same software as the Ion/Eos, but the facepanel (your laptop) is different.

    There is also a Help button on the "facepanel."

    You can always phone ETC help. Very useful, good techs. They can walk you through the troubleshooting and specific questions about basic programming.

    Andrew
Children
No Data
Related

www.etcconnect.com