Magic Sheet symbol

Is maybe your outline color set to black?

The outline colour is set to white and the base colour is set to black. I do not seem to be able to change the base colour.
I am only doing it on my laptop I will get it onto a desk next week and see if there is a difference.
bAz

if you post the svg in your answer (you might have to zip it, if svg isn't an accepted file extension) i would gladly take a look at it

Thank you. I have tried to paste the svg here but cannot do it. I have zipped it but still cannot paste it.

Baz

better?

Hi
Sorry it seems to be exactly the same. Maybe it's my windows laptop.
I will try it on an ION and see if it works on there.
Thank you for all your help.

it's the same on your laptop as on the Ion.
the difference for me was, that before i couldn't see the 100 tiny circles, only a rectangle. now i see the circles and the circles change color according to the channel. and when i bring intensity up the symbols becoms brighter.
in Eos i linked the outline to color and the fill color with intens.
if you tell me exactly what you want, i can help. which part do you want to change when you bring up intens which part do you want to change when you change the color of the channel?

Hi
When the ovation is on the magic sheet and is selected that is a colour is on or the fixture has a level then it works as it should.
When you take all the colours out and set it to 0ff it disappears from the screen leaving only the channel number that you can see.
Sorry if im not making much sense.

ah, all colors at 0... i never do that, so i didn't think to check that. this means you need to add an object or layer in your symbol that does NOT have one of ETC's special names