Simple "Go" and "Back" macros: trouble with "Back"

If I select a cuelist number, it works fine... I am using a bunch of cuelists, though, and I would like it to be generic and just tie it to the master fader instead of a specific cuelist. (Worse comes to worse, I could always edit the macro to reflect the cuelist I'm using before we do the cues, I suppose). I'm running 2.61

Okay, issue solved, sort of... although it appears that you can record a generic "Go Master Fader" macro, it still seems to be tied to the specific cue list which was active when it was written. So my solution will be to edit the Go & Back macros to reflect the current cue list when I want to use the remote trigger. Here it is in all its glory. (Actually a prototype of pine, the real one will be mahogany). Using standard 5-pin data cable, though I only need pins 1, 2, and 3 for this application (+12v, contact 1, and contact 2. Works great! Possible next version to include a lock-out switch on the +12v side, to prevent accidental triggers.

Okay, issue solved, sort of... although it appears that you can record a generic "Go Master Fader" macro, it still seems to be tied to the specific cue list which was active when it was written. So my solution will be to edit the Go & Back macros to reflect the current cue list when I want to use the remote trigger. Here it is in all its glory. (Actually a prototype of pine, the real one will be mahogany). Using standard 5-pin data cable, though I only need pins 1, 2, and 3 for this application (+12v, contact 1, and contact 2. Works great! Possible next version to include a lock-out switch on the +12v side, to prevent accidental triggers.