EOS Nomad - Capture Sweden Visualiser

Question

I am using Capture Sweden Student version as a visualiser for my ETC EOS Nomad software, for a few days now after each minute or so capture seems to be getting some rogue dmx from somewhere , i.e. lights will come on and in particular movers will just move around in a random fashion even if i Go to cue out. 
 
 Ive checked the connectivity between the 2 softwares and they are both still connected to each other. After another minute or so it seems to get back into doing as its told and the correct lights up and doing what needs to be done. But I've also found that if I hit "Fixture Global Reset" on my ETC software for the movers, they reset themselves and do what their meant to be doing at the time and if I select my generic fixutres and go 1 thru 20 @ full enter, then go 1 thru 20 @ out it seems to go back to normal. 
 
 Anyone experienced any problems like this or know how to fix? I emails Capture and they said it would be an ETC issue rather than Capture.

Cameron

corey cascio · Accepted Answer

If you use an ETCNomad Dongle with the appropriate number of addresses, then the output to Capture will be correct.

Mike A · Answer

The sticking and random stuff shouldn't happen and I think they are saying that is was a bug that was fixed.

But without the dongle it will flash all or some of the lights to full every 5 to 10 mins, to stop you using it without a licence dongle in a live show. (my guess was the bug was that bit became too aggressive and made things go very weird as you discovered)