• State Not Answered
  • Date
    SDWARD
  • Date
  • Replies 1 reply
  • Subscribers 185 subscribers
  • Views 1730 views
  • Users 0 members are here

Fixture Profile for Wahlberg Rotator 281?

Hi, 

I may need a profile for the Wahlberg Rotator 281; haven't been given much notice, show goes into production on 18th November!

Manual here: http://wahlberg.dk/media/281.805.006_Manual_Rotator.doc.pdf

Let me know if this is possible or not! I can't find anything close enough to do a quick edit - if something similar(ish) exists out there please let me know.

TIA, 

Sarah

Parents
  • 0
    Looking at that manual you could create a custom fixture for it very easily.

    Set pan as 16 bit on dmx 1 and 2
    Set intensity as dmx 3
    set panmode as dmx 6 with home value of 255

    Then if you put the intensity up on the channel to 100% the ML pan control should work pretty much as normal.

    (page 26 of their manual pretty much recommends setting it up like this, certainly if you have more than one)
Reply
  • 0
    Looking at that manual you could create a custom fixture for it very easily.

    Set pan as 16 bit on dmx 1 and 2
    Set intensity as dmx 3
    set panmode as dmx 6 with home value of 255

    Then if you put the intensity up on the channel to 100% the ML pan control should work pretty much as normal.

    (page 26 of their manual pretty much recommends setting it up like this, certainly if you have more than one)
Children
No Data
Related

www.etcconnect.com