AURORAE LED PAR LP-10 not going out on Ion

Question

Hi all, I'm hope there's a quick answer to this, or a workaround that would solve it. Here's the problem: 
 we have a bunch of AURORAE LED PAR LP-10 units, and using the personality from the fixture library they don't turn off at "0". 
 When their intensity is between 0-4, they have a glow; and then at 5 the go black. If I want to "release" everything on the stage and go to black, the LED's then stay glowing. They go to Intens-0/ R-100/ G-100/ B-100. 
 Question is how to I set the default for a blackout to either have the Intens go to 5, or have all the RGB's go to 0 as well.

ueliriegg · Accepted Answer

i can see that the personality doesn't match the manual. you could try to edit it by going to patch, fixtures, arrow to the aurorae, press Copy (bottom left corner of CIA), Edit, use arrows to go to Intens. click Range (bottom left corner of CIA). you should see 0 255 0 100. change it to 18 255 0 100. Return Return. select your channel(s) and change the type to the copy you edited. 
go back to Live and test

khxnv · Answer

Thanks to you both, sounds like one of these will work - I hadn't looked into the personality editor, but that seems to make the most sense for this problem. Can't wait to finally get this under control before the first show with these. Thanks!