Undo/Unlink Cues?

I know how to link/loop cues because I have accidentally linked all of them. Is there a way to unlink/undo this? I am taking a lighting tech class and for the final we're on the board on our own after not learning too much.

  • You should be able to select all the cues and link to nothing.


    I'm not in front of a console, but

    <Cue> 1 <thru> link <enter>

    should do it.
  • If you realize that you've made a mistake right after you made it, you can use the Undo button (it will work later as well, but then you would have to undo everything up to that point).
    The way to unlink uses an analogy that is being used in a lot of different places in the console: do the same thing again that you did to put it there, but leave away the amount.
    Cue 1 Link 5 Enter put it there, Cue 1 Link Enter removes it.
    Cue 1 Hang 3 Enter, Cue 1 Hang Enter
    Chan 2 Time 6 Enter, Chan 2 Time Enter
    Chan 5 at 30 Enter, Chan 5 at Enter
    Chan 6 Effect 914 Enter, Chan 6 Effect Enter
Related