• Date
    cooperism
  • Date
  • Replies 4 replies
  • Subscribers 186 subscribers
  • Views 6073 views
  • Users 0 members are here

Is there a programming option in patch for offsetting Pan/Tilt values?

Currently working on a show that originally had some moving head fixtures hung straight down, but after some thought I've decided to yolk them out instead. I've already cued my show and was hoping to be able to offset the tilt values in order for my cues to work. The fixture I'm using is an Extended Elation ACL 360 Bar.

Thanks!

Parents
  • I don't know if you can directly add an offset, but you can do the equivalent by copying the fixture in patch and changing the range on the Tilt parameter from where it has User Min -100 and User Max 100 to say User Min 0 User Max 200, which should mean if you had the tilt parameter at zero in your cue it would now be outputing the DMX value that setting it to -100 would have output previously .
Reply
  • I don't know if you can directly add an offset, but you can do the equivalent by copying the fixture in patch and changing the range on the Tilt parameter from where it has User Min -100 and User Max 100 to say User Min 0 User Max 200, which should mean if you had the tilt parameter at zero in your cue it would now be outputing the DMX value that setting it to -100 would have output previously .
Children
No Data
Related

www.etcconnect.com