• Date
    cooperism
  • Date
  • Replies 4 replies
  • Subscribers 186 subscribers
  • Views 6073 views
  • Users 0 members are here

Is there a programming option in patch for offsetting Pan/Tilt values?

Currently working on a show that originally had some moving head fixtures hung straight down, but after some thought I've decided to yolk them out instead. I've already cued my show and was hoping to be able to offset the tilt values in order for my cues to work. The fixture I'm using is an Extended Elation ACL 360 Bar.

Thanks!

Parents
  • Not to be an I Told You So or anything, but for future reference.... This is where Focus Palates et al come in handy!
    You can readjust your focus points without having to bother with altering any cues.
    If your units have the same focus in half the cues, you only have to adjust your points once as opposed to in every cue.

    (Even if you offset your values, the positions might not be exactly where they should be.)
Reply
  • Not to be an I Told You So or anything, but for future reference.... This is where Focus Palates et al come in handy!
    You can readjust your focus points without having to bother with altering any cues.
    If your units have the same focus in half the cues, you only have to adjust your points once as opposed to in every cue.

    (Even if you offset your values, the positions might not be exactly where they should be.)
Children
No Data
Related

www.etcconnect.com