• Date
    cooperism
  • Date
  • Replies 4 replies
  • Subscribers 186 subscribers
  • Views 6073 views
  • Users 0 members are here

Is there a programming option in patch for offsetting Pan/Tilt values?

Currently working on a show that originally had some moving head fixtures hung straight down, but after some thought I've decided to yolk them out instead. I've already cued my show and was hoping to be able to offset the tilt values in order for my cues to work. The fixture I'm using is an Extended Elation ACL 360 Bar.

Thanks!

Parents
  • You could try to edit the presets/pallets in blind. (or even directly in the cues) You can select your presets, then your channels and give the @ +90 command. If it is the other way you can do a @+-90. This will edit the current values by + or - your given value. Of course you will have to check them all, but it should save you some trouble.
Reply
  • You could try to edit the presets/pallets in blind. (or even directly in the cues) You can select your presets, then your channels and give the @ +90 command. If it is the other way you can do a @+-90. This will edit the current values by + or - your given value. Of course you will have to check them all, but it should save you some trouble.
Children
No Data
Related

www.etcconnect.com