Subfader changes Hue on S4

I set two channels with Source 4 Series 2 fixtures to a certain intensity and a gel color. Then i record it to a sub.

When i pull up the sub, it also changes the Hue data and fades to the color i recorded.

What am i doing wrong?

Parents
  • +1
    Change the fader to an intensity master.

    Sub X {Properties} (softkey), change the Master from 'Prop' proportional to 'Int', intensity master.

    You may also want to turn on Unmark At 0, this will release control of the channels when the sub is at 0.

    Now when you move the fader off 0, the parameters will snap to the correct colour. Also pressing the bump button will also mark the channels.
    Sadly you can no long flash the sub.
Reply
  • +1
    Change the fader to an intensity master.

    Sub X {Properties} (softkey), change the Master from 'Prop' proportional to 'Int', intensity master.

    You may also want to turn on Unmark At 0, this will release control of the channels when the sub is at 0.

    Now when you move the fader off 0, the parameters will snap to the correct colour. Also pressing the bump button will also mark the channels.
    Sadly you can no long flash the sub.
Children
Related

www.etcconnect.com