• State Suggested Answer
  • Date
    Alan V
  • Date
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 187 subscribers
  • Views 2324 views
  • Users 0 members are here

Can I keep a certain channel permanently visible in my displays?

I would like to keep my hazer channel information permanently visible while programming. It has beam information, so I'd also like to see all that but I don't need to see all colour information for my LEDs etc. 

 

I know there must be a simple solution for this, but I can't find it.

 

Thanks

 

alan

Parents
  • 0
    You wanne programm the Haze in?
    Then put the Channels on a Submaster.
    Before store you see them in Yellow.

    If you don't wanne store this in a Cue then put in on a Submaster.
    And exclude this Sub from recording.
    You will see the values of the Haze in Yellow before and after store a Cue.

    Thats the Way i try it.

    Or create a Fader in Magic Sheet. So you also can see the Value of this Channel.
Reply
  • 0
    You wanne programm the Haze in?
    Then put the Channels on a Submaster.
    Before store you see them in Yellow.

    If you don't wanne store this in a Cue then put in on a Submaster.
    And exclude this Sub from recording.
    You will see the values of the Haze in Yellow before and after store a Cue.

    Thats the Way i try it.

    Or create a Fader in Magic Sheet. So you also can see the Value of this Channel.
Children
No Data
Related

www.etcconnect.com