Fixture Request: Eurolite LED SLS-7 HCL Floor

If you put it in 6 channel mode then the profile Generic LED RGBAWUv 8B is an exact match.

Whilst I know you said you wanted the 10 channel mode, the 6 channel might be better than nothing.

If you have to have 10 channel mode and assuming you are not interested in the preset stuff on channel 9 and 10 (does anyone actually ever use these?) then the profile Generic LED ISRGBAWUv is a match for it, either add a couple of dummy things (eg barn1 barn2) for dmx 9 and 10 or when you patch them make sure you skip 2 dmx values between the channels, as the profile only has 8 DMX in it.

If you want to use the strobe on that you will need to edit the number 9 Strobe mode in the profile to have the range for Open as 0 thru 9 (instead of 0-125) and the range for strobe as 10 thru 255 (instead of 127 - 255).

If you've not edited a profile you patch with the one you want from the library and then hit edit, it lists all the profiles in your show, find the one again, click copy and then you can edit the copy. Obviously rememnber to change the fixture to patched with the copy or you wont achieve anything)

If you put it in 6 channel mode then the profile Generic LED RGBAWUv 8B is an exact match.

Whilst I know you said you wanted the 10 channel mode, the 6 channel might be better than nothing.

If you have to have 10 channel mode and assuming you are not interested in the preset stuff on channel 9 and 10 (does anyone actually ever use these?) then the profile Generic LED ISRGBAWUv is a match for it, either add a couple of dummy things (eg barn1 barn2) for dmx 9 and 10 or when you patch them make sure you skip 2 dmx values between the channels, as the profile only has 8 DMX in it.

If you want to use the strobe on that you will need to edit the number 9 Strobe mode in the profile to have the range for Open as 0 thru 9 (instead of 0-125) and the range for strobe as 10 thru 255 (instead of 127 - 255).

If you've not edited a profile you patch with the one you want from the library and then hit edit, it lists all the profiles in your show, find the one again, click copy and then you can edit the copy. Obviously rememnber to change the fixture to patched with the copy or you wont achieve anything)