Latest firmware etc ion

The experts will be along shortly, but most parts are updated with the general new software version.
www.etcconnect.com/.../DownloadAsset.aspx

That link will fade out when a new update is available. How far a jump are you doing? If you go back far enough there are key caps to change, and even a firmware update to the output so RDM happens. That's back around v2.0 in 2013!

The experts will be along shortly, but most parts are updated with the general new software version.
www.etcconnect.com/.../DownloadAsset.aspx

That link will fade out when a new update is available. How far a jump are you doing? If you go back far enough there are key caps to change, and even a firmware update to the output so RDM happens. That's back around v2.0 in 2013!

I know we r going a long way . Console purchased in may 2013 ... ouch

The easy thing is to down load the update to a USB stick and call tech support when you are in front of the console. They can walk you through the process (no big deal) and make sure everything goes right, or sort it all out if it doesn't!!

With that big of a jump please also have a look at the release notes and at the manual supplement. The latest version of the supplement has all the previous changes as well, all in one document.

With 5 years worth of changes you should allow for some time to re-adjust before you go back into production.

Thanks Rick. Software update to current went great. ION is now current. Saved show files to USB. Then downloaded latest software from USB with ETC tech support on the phone with us while we did the work. all good. Gary Byers TD Roxy Theatre Owen sound ON cda