I am running a small setup based on a nomad and gadget and a 2 x 10 fader wing. Basically I have groups of channels on each fader and mix and match to record cues. This works very well for the quick programming that I need to do. However, if I need to adjust individual channels in cues, I either have to use the virtual intensity wheel or enter values on the keyboard, both of which are quite slow and make it hard to watch the stage at the same time.
Is there a way I can create a macro that will automatically assign a selected channel or group of channels to a fader on the wing that will then act as an intensity master for those channels?
