How do i make a cue list forget about other insturments?

I am currently designing a show on the Gio and I am controlling the movers in a second cue list. Somehow my conventional cue list has gained values for the Movers. Is there any way I can make cue list 1 ignore the movers and have cue list 2 ignore all the other lights?

0 Druuka over 7 years ago

You can remove the data from the cues by going into blind, selecting all the cues you want the data remove from, selecting the channels you want to remove, and @ enter those channels. You could also apply a channel filter to the cues which will make the cuelist just play back the channel within the filter. This is done in the cue list display or Tab 36. I would suggest removing the unwanted data.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Dawkin over 7 years ago in reply to Druuka

During my church for Tab 36 I have descovered that my board is in 1.4. Oh well. @ enter it is.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
+1 Rohan over 7 years ago

The best way to achieve what your requesting would be to create a partition for your movers and a partition for your incandescents - this can be done in show settings under partitions.

You can then assign a cue list to a specific partition in tab 16 using the soft-key.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Reject Answer

Cancel
0 ueliriegg over 7 years ago in reply to Dawkin

uhm, 1.4 as in software version 1.4? Gio was initially released with a higher verxion and i don't think it can even work with 1.4. my guess is you saw a version number that isn't the version of the Eos software but maybe of the OS image. start the software and with an empty command line press the About key. Tab 36 was introduced in 2.4

current version is 2.6.4, if you're behind talk to the theatre about updating their Gio.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Louis over 7 years ago

Pure curiosity, no idea if that works:

Blind, Clue List 1:
Cue 1 thru Enter.
Channel 1 thru 10 (just the conventional ones) copy to cue 3 / Enter

With that, only the convertible lamps would have to be copied into the new Cuelist 3.
With this way no background data should be taken over for the Movers or?
Means, really no Data in Cuelist 3 for the Movers

Then delet Cuelist 1 and move Cuelist 3 to Cuelist 1.
(If you have no other Targets in Cuelist 1)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Dawkin over 7 years ago in reply to Rohan

This is what i did and it worked wonders for the rehearsal today! thank you so much!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel