Submaster color

Question

Hello, 
 Whenever I record an LED with a color to a submaster the color never snaps in until the subfader reaches 100% intensity. 
 e.g. I record an LED that is originally white to red and save it at 100% intensity to a subfader. The LED then only really turns red when the subfader is at 100%. Is there a way that the subfader can just always output the LED to be red? 
 Sorry if this made no sense.

Mike A · Accepted Answer

You need to set the sub as an intensity master (I-master) That means the fader only alters the intensity rather than fading all parameters

Rohan · Answer

As Mike suggested, you just need to change the sub from a proportional master to an intensity master. You can do this in tab 15: