Anyone know if there is an option when using multi cue lists, to turn a cue list off when faded to zero, and an option to reset a cue list when on off?

Do you want to close this cue list after the last Q? If so, please set up the edit box and set "Go from last" to "Cue out".

No, I want to slide the fader to zero and when I hit zero I would like the cue list to turn off, and having a separate option that would reset the list to cue one when the list is turned off.

so let's say I have a list of ten cues, and on the fifth cue I want to shut off the list quickly, I can just zero the fader, and when I bring the fader to 100 the list reactivated to cue 5. And if I want to shut off the list but want to restore the list back to cue 1 when I reactive the list I zero the fader, then bring the fader back to 100.

In hog and ma the 2 fader options are (Off at Zero) and (Reset on Off). Sounds silly, but trust me there are so many uses for those 2 options while running multi cue lists.
I think a third option (Go at On) to be able to activate the list or (go) when the fader is lifted from zero would be needed as well for more options. So 3 options (Off at Zero) (Go at On) (Reset on Off).
I'm new here, where/ how do I do a feature request?

There are no two functions in the Fader configuration。 I tried to use macros to accomplish functions like MA, but failed. the Fader button options are "Release "(Reset on Off) and "Off"(Off at Zero) in the Fader Confirguration.You can also use the combination key on the keyboard to do that。【Release】+【Load】= “Release”，【Off】+【Load】=“Off”。
I hope this is what you want.

IanG said:

I'm new here, where/ how do I do a feature request?

 

 

You just did. There is no separate bugtracker or forum other than this one, at least not for people who aren't ETC employees. People will generally post a discussion here and put "Feature Request:" at the front of the title.

IanG said:

I'm new here, where/ how do I do a feature request?

 

 

You just did. There is no separate bugtracker or forum other than this one, at least not for people who aren't ETC employees. People will generally post a discussion here and put "Feature Request:" at the front of the title.

Ahh copy that!