Sheet showing attributes tied to category

Question

Hi All, 
 Just wondered, is there a sheet or a file breaking down all the attributes available to fixtures on EOS to their respectable categories? 
 I.e. Pan & tilt = focus category; Red, Green, Blue & White = colour category, etc 
 Thanks all

Mike A · Answer

I think the closest you are going to get to what you want is to create a new show and patch a load of different fixtures and then run the Export to USITT ASCII 
 
Near the top of the export file you will get something like the bit below. It only exports this bit for attributes used in the fixtures you have patched (hence patching lots of them)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
! Fixture Parameters 
! $$ParamType Id, Cat, Short name, Long name 
! Id is the parameter type that appear in $$Param. 
! Cat is defined as follows: 1=Intensity, 2=Focus, 
! 3=Color, 4=Image, 5=Form, 6=Shutter, 7=Control 
 
$ParamType 1 1 Intens 
 $$ShortName Intens 
$ParamType 2 2 Pan 
 $$ShortName Pan 
$ParamType 3 2 Tilt 
 $$ShortName Tilt 
$ParamType 4 6 _Width 
 $$ShortName _Width 
$ParamType 5 6 _Height 
 $$ShortName _Height 
$ParamType 6 3 Z 
 $$ShortName Z 
$ParamType 7 3 Hue 
 $$ShortName Hue 
$ParamType 9 3 Cyan 
 $$ShortName Cyan 
$ParamType 12 3 Red 
 $$ShortName Red 
$ParamType 13 3 Green 
 $$ShortName Green 
$ParamType 14 3 Blue 
 $$ShortName Blue 
$ParamType 48 3 Amber 
 $$ShortName Amber 
$ParamType 49 3 Red_Orange 
 $$ShortName Red-Oran 
$ParamType 50 3 Indigo 
 $$ShortName Indigo 
$ParamType 51 3 White 
 $$ShortName White 
$ParamType 79 5 Zoom 
 $$ShortName Zoom 
$ParamType 84 6 Barndoor 
 $$ShortName Barndoor