Fixture Profile Update Request. Sky Panel in Pixel Modes

Question

I'm looking to run the Sky Panel S360c in mode 25 (RGBW + CCT,16bit). Can I get a profile that puts the separate cells into the new multi cell (or point cell) function? 
 
 DMX Protocol Specification v4.4 
 
 Thanks.

saranow · Answer

My apologies. Here is what I have learned: The multi-cell versions of the Arri fixtures were not working properly in EOS 2.7 so they were removed from the release. 
We are working to add Multi-Cell versions of the Arri fixtures back through a fixture library patch to EOS 2.7. 
Do you have specific modes of specific Arri fixtures you need? 
 
Thank you,

Patrick Schulze · Answer

You could try making a copy of Mode 6 and remove channels 17-20. Put the fixture in Mode 25, and patch 12 instances of your new mode 6 into EOS. In mode 25, the S360 uses 193 channels total. 192 for control, and the last for Fan. if you are in a place where you may need further fan control (other than automatic), make another copy of Mode 6, removing channels 18-20, and use this as the 12th fixture. If you choose NOT to use a fan channel, be sure to allow the extra channel for patching purposes, or the first channel of the next S360 will be playing with the fan channel. Make sure you allow 193 channels per fixture, regardless.

Fixture Profile Update Request. Sky Panel in Pixel Modes

Top Replies