connecting ION to Wysiwyg r22 on windows vista... help please

Heya there, i am a little lost... i have been using the ion (v.1.4.2.9.0.42) to connect to a XP PC running wysiwyg r22 and everything was going well.

Now i have been trying to connect the same console to a pc running vista and wyg. The IP settings on the pc are the same as on the old XP. The console also comes up when i look at available networks. I can ping the ion without any loss, but it won't give me any beams!? Is there anyone out there who can help with this?

Parents

Richard over 15 years ago

I think that Wyg under Windows Vista only supports ETCNet2/EDMX, and not the other patch/selection sharing functions.
I suspect you'll need to talk to Cast or your Wysiwyg dealer. I know that Wyg has some issues under Windows Vista, but I don't know exactly what they are and how far Cast have got with sorting them out.
Vista does some very strange things with network and graphics cards - it's a pain trying to convince older software to work happily!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Richard over 15 years ago

I think that Wyg under Windows Vista only supports ETCNet2/EDMX, and not the other patch/selection sharing functions.
I suspect you'll need to talk to Cast or your Wysiwyg dealer. I know that Wyg has some issues under Windows Vista, but I don't know exactly what they are and how far Cast have got with sorting them out.
Vista does some very strange things with network and graphics cards - it's a pain trying to convince older software to work happily!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

respondeckon over 15 years ago in reply to Richard

Thanks Richard i thought that might be the case, when i run the client software on the vista machine it happily talks to the desk...
I would be still interested to see if other poeple out there experiencing the same and if anyone found a solution.
cheers
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel