• Date
    Robert452
  • Date
  • Replies 8 replies
  • Subscribers 185 subscribers
  • Views 4574 views
  • Users 0 members are here

[Sneak] problems

Still messing with ETCnomad waiting for real Element 2 board. And having problems replacing [Release]  with [Sneak].

I set 20 thru 30 to full (red) and then save to a cue (blue).

Next, set 65 & 67 to full (red).

Now, [Sneak] [Enter] gets rid of (clears) the last entry (65 and 67),  Great! BUT

[Select Manual] (Or [Select Active]) [Sneak] doesn't clear the 1st entries (blues) as I was expecting.

How do I "Clear the Board" like [Release] [Release] did?

I know the answer is staring me in the face. Getting tired I guess.

Parents
  • When you record a cue the EOS Family board takes you to the state of that cue (you are in the cue when you hit enter). So to "Release" to a black stage you need to either "Go Cue Out" or "Go to Cue 0" (as in zero). The Expression series didn't take you into the cue when you recorded. That is the difference you are seeing. Check the manual for the nuances of the "Go to Cue" syntax. For most people building a series of cues, working from one cue to the next, only recording changes (i.e.. tracking) is faster than starting from black for each cue.
  • in reply to Lloyd32322
    OK and will do. I now see their difference in philosophy here. Thank you.
Reply Children
No Data
Related

www.etcconnect.com