Q List stuck in Man mode

In settings we've got Automark Enable and Automark time 0.

Hello, Boris:

Could you perhaps show us a screenshot of what you are experiencing?
Or call your local technical support?

For technical support in the Americas,
please call 608-831-4116
or toll-free in the U.S. at 800-688-4116
service@etcconnect.com

For technical support in Europe, The Middle East & Africa
please call (+44) (0) 208 753 0984
techservltd@etcconnect.com

For technical support in Germany, Austria, Switzerland, Eastern Europe & Russia
please call (+49) 8024 4700-0
techserv-hoki@etcconnect.com

For technical support in Asia,
please call (+852) 2799 1220
techservasia@etcconnect.com

Thank you,

Hello, Boris:

Could you perhaps show us a screenshot of what you are experiencing?
Or call your local technical support?

For technical support in the Americas,
please call 608-831-4116
or toll-free in the U.S. at 800-688-4116
service@etcconnect.com

For technical support in Europe, The Middle East & Africa
please call (+44) (0) 208 753 0984
techservltd@etcconnect.com

For technical support in Germany, Austria, Switzerland, Eastern Europe & Russia
please call (+49) 8024 4700-0
techserv-hoki@etcconnect.com

For technical support in Asia,
please call (+852) 2799 1220
techservasia@etcconnect.com

Thank you,

cloud.mail.ru/.../GcGqUAxUC This is video with a problen. Sorry for my voice, I was very tired))

hi sasha

i have another showfile with that problem. it seems to happen no matter if referenced marking or automark. if you have a cuelist in manual mode and crossfade with the faders into a M cue, the mark will not complete, if the channels marking have a tracked intensity (magenta MK). the mark will complete if the channels just faded out (green MK).

if you need the showfile i can PM it.

Thank you, Ueli. I can see it but we are looking for the cause/resolution at this time.

Thank you all for your patience.

This is most certainly a bug. I am writing up the bug report now. SCR - RND 0047699: Mark is Not Executing When Manual Timing is Used with Cues
The last time this was working correctly was in v2.6.4.
We will fix this in a future version and apologize for the inconvenience.

Thank you,

Can we please push this to 2.7.3?

Thanks a lot))

Hello, All:

We are working to see if we can fix this is v2.7.3 and get that out to beta soon.

Thank you,