Effects question.

probably something like this:

That’s pretty much what I did

thanks so much

So I did this and it worked. But now I’m being asked to make it more harsh??

so my new question is can I make two different effects and run them at the same time? The goal would to be to make the one that’s going to 100% go to 100 then 0then 100 very dramatically, very sharp

The "In Time" is the Fade Time coming into that step.  So to make it "harsh" change that time to 0 for a snap.  The "Dwell Time" determines how long you sit in that step.  The "Decay Time" determines the fade down/out of the step.

You can only have one effect running per parameter at a time.  In this case Channel 1 can have an effect running and Channel 2 can have a different effect running.

You can copy this effect using the [Copy To] command and then modify effect 2 to have the harsher timing.  From a cue you can execute effect 1 for a period of time, then in the next cue (via a follow time if you want it automated) run effect 2.

Thank you very much!!!

Thank you very much!!!