Feature Request: Auto-Dark-Move-Cue

Do you just want it for pan/tilt or also for gobo's, colour, shutters, etc? I personally think it is better to make the decision to put at light at zero percent myself, otherwise transitions become very unpredictable. Also, do you see this as a per cue setting or as a global setting for the whole cue list? 

Did you know you can look ahead in your cue list to see which fixtures are changing in the next cue by pressing [ABOUT]+[NEXT]?

i think it's less about a mode than a function that you can use to have to console create a cue for you

Would you like to copy Cue 0?

That's not directly possible but Goto Out or Goto Cue0 then Record your cue would do a very similar thing. You might put it all into a macro... (picking a number 'before this cue but after the previous one without using any existing numbers' is pretty complex logic.)

Thats right. On our old console, this was a manual thing that you could create for every cue manually. Often, an open move is what the designer wants, so it shouldn't be an automatical thing.

But in this case, all my fixtures would fade to black, right? I only want all the fixtures to fade to black, which do a Live Move.

First of all: the term Live Move in Eos means fading to or from 0 while changing, which doesn't apply to your case.

I think you can get a macro to do what you want. Will have a go at it later today

Hello, I miss that function too! a very good thing in Compulite, especially when you have a few projectors and you have to do a lot of things !!
Then find different ways to solve the problem in Eos, but at the moment I think that all will be slower than the force-black! I would make a cue clone in autofollow by forcing the switching off of the projectors and then re-igniting the target cue!
ciaoo