2.8 magicSheet Submaster Not holding

This issue with the Submaster Magic Sheet Objects has been submitted as EOS-48477 and should be fixed in a future version of software. 

A workaround for your Magic Sheet Object:

• Create a new macro with the contents "SubDown 1 # SubUp 1 #" where "1" is your submaster number.
• Set the target for your Magic Sheet Object to "Macro".
• Set the target ID of that object to match the macro you just recorded.

It should also be noted that if you add a virtual fader object to your magic sheet and assign that fader to your submaster, it's bump button will observe holds properly.

This issue with the Submaster Magic Sheet Objects has been submitted as EOS-48477 and should be fixed in a future version of software. 

A workaround for your Magic Sheet Object:

• Create a new macro with the contents "SubDown 1 # SubUp 1 #" where "1" is your submaster number.
• Set the target for your Magic Sheet Object to "Macro".
• Set the target ID of that object to match the macro you just recorded.

It should also be noted that if you add a virtual fader object to your magic sheet and assign that fader to your submaster, it's bump button will observe holds properly.

Thanks!

 I will wait for the final fix, we have more than 100 submasters per show.

 Thanks again 

Hey Carlos!

Take a look at the post below. 2.8.1 is in public beta and contains a fix for this issue.

community.etcconnect.com/.../magic-sheet---submaster-users---please-read-if-you-are-running-2-8