• State Suggested Answer
  • Date
    kporth
  • Date
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 186 subscribers
  • Views 1204 views
  • Users 0 members are here

Controlling Ion Cue List with Gio @5?

I'm currently doing a show where we have an @5 controlling 4 universes worth of addresses, and an Ion backstage controlling the remaining 2 universes. Is there a way I can set up show control to trigger their separate cue lists at the same time? I don't need control of the fixtures individually, I just want to press [go] on the @5 and have it trigger the same cue on the Ion's cue list. 

Parents
  • 0

    i think you should be able to use the setting Setup > System > Show Control > OSC of the OSC Cue Recv String on your ion (assuming the operator sits at the @5). the assumes that your two cuelists are numbered equally. you don't need to have all the cue on both consoles. but the ion will only fire cues if the @5 has a cue with the same number.

    if you go to the setup place i mentioned above and hover your mouse pointer over that field you will get a small tool tip that shows you how it works

Reply
  • 0

    i think you should be able to use the setting Setup > System > Show Control > OSC of the OSC Cue Recv String on your ion (assuming the operator sits at the @5). the assumes that your two cuelists are numbered equally. you don't need to have all the cue on both consoles. but the ion will only fire cues if the @5 has a cue with the same number.

    if you go to the setup place i mentioned above and hover your mouse pointer over that field you will get a small tool tip that shows you how it works

Children
No Data
Related

www.etcconnect.com