Feature request: Fader Pages selection

I have a workaround for this! It requires you to change the way that you think about the faders, but bear with me. Create your fader pages 3 through whatever as if they were all on the bottom row while Fader Page 1 is on the top row. Then write macros of this format:

Fader 3/1 thru 3/10 CopyTo Fader 2/1 Enter Enter

Fader 4/1 thru 4/10 CopyTo Fader 2/1 Enter Enter

etc. etc.

That way, Fader Page 2 doesn't ever have to be a permanent thing, it's more of a location into which you can put all of your permanent, pre-built fader pages. With a more clever format than the above, you can do the same thing with as many banks of faders or individual faders as you want, and essentially turn your fader wing into the equivalent of a Custom Direct Select page.

I have a workaround for this! It requires you to change the way that you think about the faders, but bear with me. Create your fader pages 3 through whatever as if they were all on the bottom row while Fader Page 1 is on the top row. Then write macros of this format:

Fader 3/1 thru 3/10 CopyTo Fader 2/1 Enter Enter

Fader 4/1 thru 4/10 CopyTo Fader 2/1 Enter Enter

etc. etc.

That way, Fader Page 2 doesn't ever have to be a permanent thing, it's more of a location into which you can put all of your permanent, pre-built fader pages. With a more clever format than the above, you can do the same thing with as many banks of faders or individual faders as you want, and essentially turn your fader wing into the equivalent of a Custom Direct Select page.

Interesting idea, using a macro to rewrite bank 2. What I've done in a couple of shows is copy my fader page 2 (the fixed page) to the first 10 even numbered pages, so when I call up any odd-numbered different page the bottom bank is always the same faders.