• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    dareus
  • Date
  • Replies 3 replies
  • Subscribers 187 subscribers
  • Views 1111 views
  • Users 0 members are here

Problem with Robe ColorWash 1200E AT on GIO@5

Hi guys. I've got brand new GIO@5 and have started to work with it. I came to a problem with all of my Robe ColorWash 1200E AT moving heads. When I'm putting it to patch with right mode and everything, the shutter starts to strobe and Pan is moveing to left side for few degrees. on the other hand I can change its colore moving its pan tilt and everything, but in any position that it is, is still strobing and panning. On the other hand all of the Robe ColorSpot 1200e profiles, that i'm useing are working perfectly.

Parents
  • 0

    Assuming you're selecting the correct mode for the fixture in Eos, there's a chance the parameters are homed in the incorrect position. Looking at the fixture profile for M4, take a look at the Position Macros/Position Macro Rate parameters as well as the Strobe Mode/Shutter Strobe parameters. If Eos homes those parameters at the incorrect position, there's a chance it could explain the issues you're having.

Reply
  • 0

    Assuming you're selecting the correct mode for the fixture in Eos, there's a chance the parameters are homed in the incorrect position. Looking at the fixture profile for M4, take a look at the Position Macros/Position Macro Rate parameters as well as the Strobe Mode/Shutter Strobe parameters. If Eos homes those parameters at the incorrect position, there's a chance it could explain the issues you're having.

Children
Related

www.etcconnect.com