• State Suggested Answer
  • Date
    Andrew Bruton
  • Date
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 185 subscribers
  • Views 1063 views
  • Users 0 members are here

Magic Sheets Display with curve?

I'm not new to this so to say, I've been doing this for about 4 years now, but we recently got some new fixtures, and we've had to put a dimming curve on them to get them to blend with the rest of the rig. Is there any way to display the actual DMX output value into the Magic Sheet while also dimming the fixture in the display (fill white, linked to intensity)? Any help would be greatly appreciated!

Parents
  • 0

    You could add another magic sheet button next to the fixture and set its source to address to the address the fixture is patched to and then set its display as DMX which will show the raw DMX value on that address. 

    It would be nice if you could just set the display as DMX on the channel itself but that didn't seem to work for me, in a quick test.  But then I suppose it doesn't know which dmx parameter to display.

Reply
  • 0

    You could add another magic sheet button next to the fixture and set its source to address to the address the fixture is patched to and then set its display as DMX which will show the raw DMX value on that address. 

    It would be nice if you could just set the display as DMX on the channel itself but that didn't seem to work for me, in a quick test.  But then I suppose it doesn't know which dmx parameter to display.

Children
Related

www.etcconnect.com