• Date
    PV Gromer
  • Date
  • Replies 12 replies
  • Subscribers 189 subscribers
  • Views 3614 views
  • Users 0 members are here

Black out including NIP's

Hi,

I just started working with the EOS Software and have the question, how ot get a black out like this:

Cue 1: LED Fixture @100 with color red.

Cue 2: LED @0 -> this it the black out, intens at 0, color at red

Cue 3: LED @100 with color lime.

Now I have the problem, in cue three there will be a colour fade from red to lime, because the NIP in Cue 2 are still at "red". But i want just a fade in in the new color, here lime.

Is there any function to reset the NIP to 0 in the blackout cue?

many thanks for your help!

Paul-Vincent

Parents

  • i claim that what you actually want is not a blackout including NIPs but a console function that will not touch the NIPs when going from cue 1 to cue 2, but rather that does some magic while in cue 2 to make sure that cue 3 fades in without color change. (this color change while fading up from 0 btw is what causes the L in the MV column of PSD's flag section)

    activate the AutoMark function (and read up on it ;) ). setup, system, cue settings, automark enabled.

    www.etcconnect.com/.../Default.htm

Reply

  • i claim that what you actually want is not a blackout including NIPs but a console function that will not touch the NIPs when going from cue 1 to cue 2, but rather that does some magic while in cue 2 to make sure that cue 3 fades in without color change. (this color change while fading up from 0 btw is what causes the L in the MV column of PSD's flag section)

    activate the AutoMark function (and read up on it ;) ). setup, system, cue settings, automark enabled.

    www.etcconnect.com/.../Default.htm

Children
Related

www.etcconnect.com