hold Colour point in 2.8.1 not working...

Question

hi all, 
 i was trying the Hold colour point feature with a S4 LED S2 Lustr HSIC StrFan +7 and two things did not work for me..: 
 
 Pressing the Gel Name in the right top corner dos not remove the gel line. 
 No composite colour line for the fixture shown 
 No individual parameters are shown.... 
 
 Any ideas where I'm going wrong or have I found a feature....

ueliriegg · Accepted Answer

3: the color picker controls the HSIC values, not the +7 parameters 
 hold color point cannot work because the fixture is doing the color mixing. when using hold color point you're telling the console that it should change the recipe of a colour but must not change hte color point. but the color point is what you set with the HSIC coordinate. 
 to use hold color point you need to use a mode with at least 4 different colors.

hold Colour point in 2.8.1 not working...

Top Replies