• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    Alexander
  • Date
  • Replies 6 replies
  • Subscribers 186 subscribers
  • Views 1395 views
  • Users 0 members are here

FEATURE REQUEST

Hi all!

Situation: needs to mark all NPs from submaster and then flash it.

1. mark NPs button works just when channels at 0% - not so usefull there

2. assert works depends from level on master, so if it down - NPs in proportional mode will be in home

3. intensity and NPs works both from bump button

I think we need a flash button just for intensity, and it will be usefull to have possibilty to assign different filters for each button.

Thanks for attention!

Parents
  • 0

    Make the sub Intensity Master, and change the buttons so the bottom is Mark and the Top is Bump.  That should work for you.  (or top is Mark, and bottom is Bump)

  • 0 in reply to Andrew Riter

    before writing this post I checked it on 2.9.0 b21, it doesn't work.

    did you checked it well? On which software version?

    Thanks!

  • 0 in reply to Alexander

    and mark doesn't work when intensity above 0%, so it is not solution...

  • 0 in reply to Alexander

    I'm running 2.7.4.  I didn't check it.  It seemed like a possible solution.  How about 2 subs: 1 to mark (no intensity values recorded), and 1 with only intensity values . . . ?

  • 0 in reply to Andrew Riter

    two subs is simpliest solution right now, thats why I asked for feature request:

    1. flash button just for intensity (or add filters functionality for this button)

    2. make possible to mark parameters without depending from level of intensity (maybe "mark to flash" button)

    3. add filters functionality to each button

    Thanks!

Reply
  • 0 in reply to Andrew Riter

    two subs is simpliest solution right now, thats why I asked for feature request:

    1. flash button just for intensity (or add filters functionality for this button)

    2. make possible to mark parameters without depending from level of intensity (maybe "mark to flash" button)

    3. add filters functionality to each button

    Thanks!

Children
No Data

www.etcconnect.com