Can a way more capable person please help me the step by step set up?
I've read the manual and tried but I just don't know what to do. Please help!
Can a way more capable person please help me the step by step set up?
I've read the manual and tried but I just don't know what to do. Please help!
which direction do you want to go? element is the boss and qlab follows? oder the other way round?
Q Lab is the boss
you need a physical connection with MIDI. you could use a USB-MIDI thing, USB into the mac, the MIDI out port to Element MIDI in.
next step is to activate MSC in element: Setup>System>ShowControl>MSC Receive Enabled
then you need to make Qlab send MSC commands. and that's the point where i'm a bit more fuzzy. i think to make qlab send MSC you need to add MIDI Cues and in there specify which type of midi you want (MSC) and so on. but i could be wrong about this part
OK really appreciate taking your time to reply.
Have from Laptop(Mac) an Ethernet connection to midi box, then midi to Element.
MSC Receive Enabled
QLab commands eh I'm lost as to what I'm supposed to send
You must set the Device ID.
If i remember wright, QLab starts count with Zero, EOS starts with 1.
You can add for every Video Cue in QLab a Midi Cue and group them.
So both will start if you press GO at QLab.
For add a Midi-Cue you must click and hold this sign and slide it in Playlist.
Down you can choose the settings for this Midi send.
You must set the Device ID.
If i remember wright, QLab starts count with Zero, EOS starts with 1.
You can add for every Video Cue in QLab a Midi Cue and group them.
So both will start if you press GO at QLab.
For add a Midi-Cue you must click and hold this sign and slide it in Playlist.
Down you can choose the settings for this Midi send.
I'm sorry I don't fully understand, I've tried to recreate your screenshot but with no success
www.etcconnect.com