Hello all.
Recently, me and my team have had ocasional trouble with submasters. I'll explain tha last event. We're running an IONXE with 2.8.3 and an external 2x20 fader wing.
I have recorded a Linear Effect 6 on Effect Sub 36 which strobes a few movers. I have other 2 subs (37 and 38) with variations of the same effect. They only have the effect recorded in them with no intensity values. I've been running the show now for a week and no problems. During the show, I leave the faders up and toggle the effect on/off with the bump.
Today, as I was testing my lights for the show in the evening, I did the test on the subs as usual. Problem is, this time for some reason Sub 36 put up some intensity values for channels that weren't even recorded in it. I tried [About] [Cue] to make sure where the info came from and it confirmed: Sub 36. As I told earlier, this sort of problem happened before and a Sneak or GoToCue 0 solved the problem. But as would say Sirio Forel: Not today.
I moved the fader up and down and it would consistenly bring up those channels besides the effect. Trying to bump the sub made the usual toggle of the effect but with no action on the other channels. Sneak etc. and nothing. Finnally, I went into Blind, Sub 36. Selected one of the channels which displayed the anomaly . Nothing recorded for that channel. [At] [Enter] on that single channel and suddenly all the channels went out and problem solved as though some intensity info coming from wherever was stored in some memory.
Any toughts? I guess this is some kind of bug.
Thanks in advance.
