Element nomad and arfr classic not connecting

Can you connect to the router? Just not the console?  What is the console IP?  What is the Samsung IP?  How is the network set up?
If you can please answer a few of these questions it might help us to give some more specific advice and get this working for you.

My computer does not have an ethernet port it's all wireless 

There's your problem. You should be connecting to a networking hub. A simple $20 off-the-shelf wifi router will do the job.

My PC is connected to wifi do I need to be hardwired in 

Did you verify your IP addresses & net masks?

Typically the way this is set up is that the console or ETCnomad is hard wired in and in the network sort of acts as the modem.  The router connects and routes the wireless traffic from the RFR to the console or ETCnomad.

Everything is right so what's the issue it worked fine with my old computer

If everything were right, it'd be working. We're just trying to guess at what could be the problem based upon other instances. We can't see your settings.

Do you have the remote enabled in settings?

Yea I've tried disabling and turning it back on but that didn't work 

Do you want pics of my settings

That'd be helpful. Specifically,

What is your Nomad IP address.

What is the Subnet mask

What is your wifi router's subnet mask

What is your mobile device's IP address

What displays when you try to connect your RFR

Is there a DHCP server on the network?