fixture library for Cinco MavX or the Fiilex p360 for Element/EOS

Hi there,

Can you tell me what Eos fixture library you are currently running? Looking in the contents of Eos fixture library v2.8.3 build 16 I am seeing both the Cindeo MavX and the Fiilex P360EX (in 3ch mode). Please let me know if you are still unable to see these profiles while running this software version.

Best,

Therese

Hi there,

Can you tell me what Eos fixture library you are currently running? Looking in the contents of Eos fixture library v2.8.3 build 16 I am seeing both the Cindeo MavX and the Fiilex P360EX (in 3ch mode). Please let me know if you are still unable to see these profiles while running this software version.

Best,

Therese

2.83 build 11 that i downloaded last week   

Hi Seth,

You will need to update the fixture library to v2.8.3 build 16. 

http://www.etcconnect.com/Support/Consoles/Eos-Family/Eos-Ti/Software.aspx

Best,

Therese

excellent

thank you !!!!!

one other question

I dont have the fixture yet, but im pre-patching. using my DMX'ter,

why when i put the fixture at full  do i see "00" for level on my DMXter?

I see CT going up and dpwn as well as tint

I have it patched at CH40 and address as 100

thank you again for your help

Hi Seth,

The profile looks to be written so that DMX value 255 is representative of 0% intensity and DMX value 0 is representative of 100% intensity. I am unfamiliar with this fixture and was struggling to find a manual with a DMX chart on it. Can you please provide one so that I can verify if this parameter is written correctly or not? 

Best,

Therese

let me email Fiilex folks and ask them

i dont see anything online

again, thank you for all your help !!!