2 dmx accessories, 2 lamps, 1 dimmer

 You could patch the irises as different parts of the same channel.

For example:
Address 60 (lamps) @ channel 20
Address 452 (iris 1) @ channel 20 part 2
Address 453 (iris 2) @ channel 20 part 3
(Insert your actual addresses of course)

This would give you independent control of the irises on the encoders while still controlling the lamps together.

Hope that helps!

-Chris

>This would give you independent control of the irises on the encoders while still controlling the lamps together.

Thanks.  Would I get 2 beam wheels showing up for the encoders: Beam A and Beam B?

Andrew

You would get whatever parameter name you patch them as on the encoder.  ie: if you patch them as Iris 1 and Iris 2, you would have 2 encoders named "iris 1" and "iris 2".  These would appear under the same Chan #

Hope that helps

Cheers - BFJ

You would get whatever parameter name you patch them as on the encoder.  ie: if you patch them as Iris 1 and Iris 2, you would have 2 encoders named "iris 1" and "iris 2".  These would appear under the same Chan #

Hope that helps

Cheers - BFJ