I'm trying how to figure a few thing out, any help would be appreciated.
Here is the Set-Up
4 Design Spot
26 - LED Brick 12's
1 - 4 Channel Dimmer Pack
Ion has Two Elo Touchscreens
-------------
Objective: Trying to Get the Virtual Faders set up so that Cue List 1 Controls the Design Spots, List 2 Controls the LED's, List 3 Controls the Dimmer packs. Without overriding eachother.
I currently have the VF's set at Playbacks, and Load List 1 to 1 List 2 to 2 and List 3 to 3
Each Cue List has at least 10 Cues.
When I touch play on VF 1 The first Cue is Played Back Properly, Cue 2 is also Fine....Now, I want to Bring my LED's in Cue List 2 to Cue 1, So I playback VF 2 Using the play button on the VF which turns off or overrides Cue List 1.
How do I change this so that All the Cues in List 2 or 3 do not Override Cue List 1 or Vice Versa.
I know how to create multi cue Lists (that No Problem), and I can load them to the VF, Just need help with the configuration so Eah cue list can playback at anytime without overriding eachother.
Any Help would be Appreciated.
Aaron - Metro Detroit, MI
