So we had a funny problem during our IDR last night. We were in Live, all our values were stored, but when we looked in Blind the values did not match. We were definitely looking at the correct cue stacks and nothing was manual. It only really affected one channel that we noticed - everything else looked right. Has anyone experienced anything like this before? We haven't upgraded to 2.9 yet, working on a Gio.
This may or may not relevant, but this morning when I attempted to power on the Puck with the multi-console power on command on the board, it didn't work. It has worked fine before this.
Are we haunted?
I should add - we rolled the channel in question up on the wheel and updated cue only. The value tracked through to the next cue. Is the wheel behavior our issue?
There is no guarantee that Live and Blind match. If you're sitting in a cue and then go to Blind and edit that same cue, Live will not change. Only if you type GoToCue Enter will the changes you made in Blind be transfered to Live.
Thanks for your response. We were actually making edits in Live and they were not updating in Blind. Furthermore, a value tracked when we recorded it QOnly. Would we still need to Go to Cue Enter for changes to be visible in Blind?